W40 Hinge Door Testing
Testing & Certification
AS2047-2014 Certified Steel Doors & Windows
We are proud to confirm that our FPS50 Profile and W40 (Ottostumm) Profile – including Steel Frame Glass Hinge Doors, Awning, and Casement/Hinged Windows – have been certified by Intertek SAI Global to meet the requirements of AS2047-2014, the Australian Standard for Windows and External Glazed Doors in Buildings, as mandated by the National Construction Code (NCC).
Under the NCC, any supplier of glass doors and windows for external applications in Australia must hold AS2047-2014 compliance certification.
Australian Standard AS 2047:2014
Glazing and product installation to be performed in accordance with Sections 4 and 7 of AS2047:2014
Verification
Before selecting a supplier, we strongly advise verifying that they hold valid AS2047-2014 certification. Test reports and compliance certificates should clearly show the supplying company’s name on both the report and certificate cover page.
Failure to meet this standard may jeopardise the issuance of your Occupancy Certificate by your Registered Building Surveyor or Certifier.
To verify certification, you can search for the company name on Intertek’s global product register:
All our products have undergone rigorous laboratory testing by Intertek SAI Global and successfully passed all requirements under AS2047-2014. The following laboratory tests were conducted:
- Deflection / Span Ratio AS/NZS 4420.1-2016 section 3
- Operating Force AS/NZS 4420.1-2016 section 4
- Air Infiltration at ±75 Pa AS/NZS 4420.1-2016 section 5
- Water Penetration AS/NZS 4420.1-2016 section 6
- Ultimate Strength Test AS/NZS 4420.1-2016 section 7
FPS50 Hinge Door Testing
